List of IssuesDocument Types

Volume,Issue2,1999
Issue Cover
  • Exact and Approximate Finite Deformation Theories of 2-D Beam

    Issue 2, (1999)
    Abstract:The criteria used to classify exact and approximate finite deformation theories areproposed. Based on the exact finite deformation theory of 2-D beam proposed by Li, severaluseful approximate finite deformation theories are derived. The Reissner-Simo theory isdiscussed and made into complete approximate. Numerical examples are calculated indifferent theories for comparison.  
    Keywords:2-D beam,finite deformation,exact theory,approximate theory,criteria,  
    1
    |
    8
    |
    0
    <HTML>
    <L-PDF> <Meta-XML>
    Updated:2024-02-27
  • Application of Thermal Pipe Heat-Exchangers in Recovery of Waste Heat in Closed Poultry Housing in Winter

    Issue 2, (1999)
    Abstract:It is the first time that the heat pipe heat-exchangers are applied in the recovery ofwaste heat in closed-poultry housing in winter. The calculation and optimum design of heattransfer of the thermal pipe heat-exchangers are put forward. The practical parameters aresuperior to the theoretical ones, proving that the calculation and design are reasonable. Thethermal pipe heat-exchangers can be used to recover the waste heat in closed-poultry housingfor its high efficiency and energy-saving.  
    Keywords:heat pipe heat-exchanger,recovery of waste heat,poultry housing,  
    0
    |
    6
    |
    0
    <HTML>
    <L-PDF> <Meta-XML>
    Updated:2024-02-27
  • Study and Development of Mechanical System Virtual Prototyping

    Issue 2, (1999)
    Abstract:The development of mechanical system virtual prototyping is introduced. Theeffects of mechanical system virtual prototyping on the time-saving, cost-cutting and quality-improving, etc. in the products designing are put forward briefly. The theoretical basesincluding many specialized techniques and analystical methods of dynamics and kinematicsare compared. The present situation and problems of the research on mechanical systemvirtual prototyping are discussed. The tasks of further research are given.  
    Keywords:mechanical system,virtual prototyping,dynamics  
    0
    |
    8
    |
    0
    <HTML>
    <L-PDF> <Meta-XML>
    Updated:2024-02-27
  • Constructing of Assessment Mechanism of State Industrial Policy Implementation

    Issue 2, (1999)
    Abstract:Most local governments and enterprises pay more attention to their own benefitswithout carrying out the state industrial policy conscientiously because of the lack ofrestraining mechanism. This leads to the similar industrial structure and poor division amongregions. The ways to improve the effects of the state industrial policy implementation havebeen putting forward. Being short of the methodology guidance and instrument support, theresearches only concentrate on qualitative description and analysis. Based on literatures andthe idea of process control, an assessment mechanism is constructed to explore a way toimprove the effects of the state industrial policy implementation.  
    Keywords:industrial policy,policy assessment,assessment method,  
    1
    |
    7
    |
    0
    <HTML>
    <L-PDF> <Meta-XML>
    Updated:2024-02-27
  • Application of Excel in Building Project Economic Analysis

    Issue 2, (1999)
    Abstract:The application of Excel in the building project economic analysis is introduced-The advantages of it used in economic analysis programming are discussed. The steps andthe problems which shall be cared in programming are put forward with the value analysisexamples.  
    Keywords:electronic report,value analysis,element unit,  
    0
    |
    9
    |
    0
    <HTML>
    <L-PDF> <Meta-XML>
    Updated:2024-02-27
  • Design and Realization of Chinese Tariff Revenue and Import Forecasting Software System

    Issue 2, (1999)
    Abstract:The Chinese tariff revenue and import forecasting software system including fivemain functions: the yearly tariff revenue and import forecasting, the monthly dataforecasting; the tariff rate adjusting effects analyzing, as well as the long-run and short-runforecasting models combining, etc., is designed to give the quantitative decision-makingsupports to the government. The design of the forecasting decision-making support systemfor special use must assure the main functions. The applicable models and the dataprocessing methods ought to be managed by the designer. The choices for user willconcentrate on the controllable variables. The software must be adaptable to the way of datamanagement.  
    Keywords:tariff revenue,import amount,forecasting system  
    0
    |
    7
    |
    0
    <HTML>
    <L-PDF> <Meta-XML>
    Updated:2024-02-27
  • Design on Expert System for Efficient Utilization of Agricultural Resources

    Issue 2, (1999)
    Abstract:On the basis of the intention to the efficient utilization of agricultural resources,the design on the expert system for efficent utilization of agricultural resources(EUARES) isdiscussed. Based on the analysis of Macro-objects and concrete targets of EUARES, thesystem components are described in the aspects of person, hardware, software, database,knowledge-base, model-base, and method-base. Basic and application system functions ofEUARES are described. Four key problems are disscussed, and primary conclution has beenmade.  
    Keywords:agricultural resources,efficient utilization,auxiliary expert system,systemdesign  
    0
    |
    6
    |
    0
    <HTML>
    <L-PDF> <Meta-XML>
    Updated:2024-02-27
  • Appraisal Method and Case Study on Comprehensive Utility Efficiency of Agricultural Resources

    Issue 2, (1999)
    Abstract:On the basis of the intention of efficient utility of argicultural resources, thepossibility of data source being gotten is concerned, and the index system of comprehensiveappraisement is developed. The appraisal method of efficient utility on agricultural resourcesis put forward based on the example of Hebei province Luancheng county, and some primaryconclusion is made.  
    Keywords:agricultural resources,comprehensive utility efficiency,appraisal method,case study,  
    7
    |
    6
    |
    0
    <HTML>
    <L-PDF> <Meta-XML>
    Updated:2024-02-27
  • Reform of Irrigating Management System

    Issue 2, (1999)
    Abstract:Reform of irrigating management system in big and middling irrigating areas arediscussed. Based on the situation of Zhaopingtai irrigating area in Henan province, with thepractical and theoretical methods, disadvantages of current management system isanalysised. A new irrigating management system suited to the market economy is putforward. The problems raised by the new system and the policies to solve them arementioned.  
    Keywords:irrigating area,irrigating management,system reform  
    0
    |
    6
    |
    0
    <HTML>
    <L-PDF> <Meta-XML>
    Updated:2024-02-27
  • Convergence Rate of Conic Methods for One-dimensional Unconstrained Optimization

    Issue 2, (1999)
    Abstract:Conic methods for unconstrained optimization have been discussed by manypeople, and its superlinear convergence rate has been proved by D. C. Sorensen. In thispaper, it is proved that the convergence rate order of conic method for one-dimensionaloptimization is Q -2 and converges to x' from two sides alternately.  
    Keywords:one-dimensional optimization,conic method,convergence rate,  
    0
    |
    6
    |
    0
    <HTML>
    <L-PDF> <Meta-XML>
    Updated:2024-02-27
  • Exactly Quadratic Convergence and Efficient Implementation of Gauss-Newton Method

    Issue 2, (1999)
    Abstract:The methods to solve the nonlinear least squares problem with zero vesidual arediscussed. A sufficient condition ensuring the Gauss-Newton method quadraticallyconvergent exactly is given. Based on it, a new efficient implementation of preconditionedconjugate gradient is put forward to solve the Gauss-Newton equation and save the cost oncomputation with the same exactly quadratic convergence to the traditional choleskifactorization. The ratio of computation will decrease 35% when n=200 and reduce to zero atthe rate of ln 2/ln n when n is infinite.  
    Keywords:nonlinear least squares,Guass-Newton method,preconditioned conjugate gradient,  
    1
    |
    6
    |
    0
    <HTML>
    <L-PDF> <Meta-XML>
    Updated:2024-02-27
  • Analysis of Pion Double Charge Exchange Reaction on 18O(π+,π-)18Ne

    Issue 2, (1999)
      
    0
    |
    6
    |
    0
    <HTML>
    <L-PDF> <Meta-XML>
    Updated:2024-02-27
  • Study on Field Measuring System for Soil-Engaging Components

    Issue 2, (1999)
    Abstract:The multi functional field measuring equipment is studied. The equipment can beused to measure some parameters of soil-engaging components, such as draft force, verticalforce and working depth, etc. to evaluate the performance of the components.  
    Keywords:soil-engaging components,field measuring system,draft force,vertical force of soil,working depth,walking speed,  
    1
    |
    6
    |
    0
    <HTML>
    <L-PDF> <Meta-XML>
    Updated:2024-02-27
  • Test Research on Seed Release Performance of Precision Wheat-seed Metering Device

    Issue 2, (1999)
    Abstract:Based on the analysis of working performances of the precision drill, and the teston the seed release performance of blowing-type metering device, the ma jor factors affectingthe seed release performance and the working scope are obtained. By means of optimumexperiment design, the mathematical models of the major factors are obtained. The effects ofeach factor are analysed to find the optimum working condition fitting the requirments ofseed release performance.  
    Keywords:blowing-type metering device,seed release performance,optimum experiment  
    3
    |
    7
    |
    0
    <HTML>
    <L-PDF> <Meta-XML>
    Updated:2024-02-27
  • Stress Analysis of Rough Rice Kernel in Drying and Storage With Finite Element Method

    Issue 2, (1999)
    Abstract:Based on the integral relaxation constitutive relation of viscoelastic material, theanalysis model of finite element was suggested. The axisymmetric thermo-hydro program offinite element was developed to study the stress of rough rice kernel in drying and storage.Compared with the experimental result, the reasons of kernel cracks in storage wereanalysed.  
    Keywords:rought rice,drying,finite element method,stress,  
    0
    |
    6
    |
    0
    <HTML>
    <L-PDF> <Meta-XML>
    Updated:2024-02-27
  • Forecasting Model of Germination of Grain Seeds in Cross-current Drying

    Issue 2, (1999)
    Abstract:First order kinetic model of germination of seeds dried in heated air was developedand verified. The germination of grain seeds in cross-current drying was calculated andanalyzed. The maximum available temperature of heated air to ensure the loss of germinationlower than 10% in cross-current drying were given.  
    Keywords:germination,seeds,cross-current drying,forecasting model,  
    0
    |
    6
    |
    0
    <HTML>
    <L-PDF> <Meta-XML>
    Updated:2024-02-27
  • Energy Saving of Controlled Traffic Tillage

    Issue 2, (1999)
    Abstract:Controlled traffic tillage and its current research were introduced. Under theconditions of no-tillage and tillage, the traction and the haulage power of openers on thewheeltrack and the non-compacted bed were measured in-step with a portable datalogger.The trial results showed that about 40% of the pulling energy could be conserved by usingthe controlled traffic tillage method.  
    Keywords:controlled traffic tillage,compaction,conservation tillage,  
    0
    |
    8
    |
    0
    <HTML>
    <L-PDF> <Meta-XML>
    Updated:2024-02-27
  • Developments of Plant Root Uptake Models

    Issue 2, (1999)
    Abstract:Most kinds of plant root uptake models from the first one presented by Gardner in1960 to the latters are reviewed and classified. The characters and applicabilities arediscussed for references to the research on the theory and practice of modern water savingirrigation.  
    Keywords:plant root,uptake model,soil-plant-atmosphere system  
    0
    |
    7
    |
    0
    <HTML>
    <L-PDF> <Meta-XML>
    Updated:2024-02-27
  • Application of Ultrafiltration Technology in Procession of Rumex K-1

    Issue 2, (1999)
    Abstract:Based on experiments, the application of the ultrafiltration (UF) technology onthe procession of Rumex K-1 is studied to concentrate juice and reduce the energy waste inthe leaf protein extracting. The experiments show the using of the PS hollow fiber UFmembrane in the concentrating procession of Rumex K-1 is practical and efficent.  
    Keywords:Rumex K-1,ultrafiltration,hollow fiber membrane  
    1
    |
    6
    |
    0
    <HTML>
    <L-PDF> <Meta-XML>
    Updated:2024-02-27
  • Determination of Air-water Mass Transfer Coefficient and Drop of Pressure in Wet Curtain

    Issue 2, (1999)
    Abstract:The mass transfer coefficient and drop of pressure in wet curtain are meassured bymeans of counterflowing. Two formulas are obtained. The experimental results show thatboth air and water mass rates have effects on the mass transfer coefficient and the drop ofpressure while the former was more effective than the latter.  
    Keywords:wet curtain,counterflow,mass transfer coefficient,drop of pressure,  
    0
    |
    6
    |
    0
    <HTML>
    <L-PDF> <Meta-XML>
    Updated:2024-02-27
  • Software Design for Microcomputer Measurement of Asynchronous Motor States in VVVF System

    Issue 2, (1999)
    Abstract:The communication controller of Visual Basic is introduced. A new developedcomputer system for data acquisition is used in communication between microcontrollers.This system can be used for data acquisition, analysis, displaying, saving and printing. Alsoa realization is designed in Visual Basic.  
    Keywords:microcomputer,serial communication,data acquisition and analysis,singlecontroller,  
    1
    |
    6
    |
    0
    <HTML>
    <L-PDF> <Meta-XML>
    Updated:2024-02-27
  • Improvement of Genetic Algorithms

    Issue 2, (1999)
    Abstract:Simple genetic algorithms gets local minimization too easily and converges slowly.To solve these problems, the improvement to the generation of initial population, theindication in the compete selection and the design of adaptive mutation rate that has inverseproportion to the numbers of iteration and direct proportion to the distance of parents are putforward. The practical simulation results show that the improved genetic algorithms hasgreater converge speed and larger probability of getting the best solution.  
    Keywords:genetic algorithms,improvement,selection,mutation  
    1
    |
    6
    |
    0
    <HTML>
    <L-PDF> <Meta-XML>
    Updated:2024-02-27
  • Study on Electrical Conductivity of Soybean Milk

    Issue 2, (1999)
    Abstract:The effects of temperature and solid content on electrical conductivity of soybeanmilk were studied- The heating rate and conductivity of soybean milk contained Okara wereinvestigated. The results showed that the conductivity increased with temperature and solidcontent, the heating rate and conductivity of soybean milk containd Okara were lower thanthose of without Okara. Electrical field strength had almost no effect on the conductivity ofsoybean milk  
    Keywords:soybean milk,ohmic heating,electrical conductivity,  
    0
    |
    6
    |
    0
    <HTML>
    <L-PDF> <Meta-XML>
    Updated:2024-02-27
  • Cucumbers and Cowpeas Storage Under High Voltage Electrostatic Field

    Issue 2, (1999)
    Abstract:The result of study on cucumbers and cowpeas storage under High VoltageElectrostatic Field (HVEF) shows that HVEF can depress the respiration of vegetables andrestrain water loss. According to previous study, the main cause of keeping fresh is that themembrane potential of vegetables' cells is modified by HVEF. Cucumbers can be kept freshfor 27 days (12 days more than the contrast) and cowpeas for 12 days (5 days more than thecontrast) under the experiment condition.  
    Keywords:electrostatic field,storage,cucumber,cowpea  
    7
    |
    6
    |
    0
    <HTML>
    <L-PDF> <Meta-XML>
    Updated:2024-02-27
  • Extraction Techniques of Rumex Acetosa Leaf Protein by Fermentation Acid Method

    Issue 2, (1999)
    Abstract:The juice prepared with Lactobacillus delbriiekii fermentation and pickledvegetable fermentation separately was used to precipitate the Rumex leaf protein. The resultshowed that 59. 22%-61. 25% of raw protein and 35. 3% -43. 5% of extraction rate wereobtained with the former juice while 56. 32%-59. 48% of raw protein, 40.00%-44. 97% ofextraction rate the latter.  
    Keywords:Rumex,leaf protein,fermentation acid,extraction rate,  
    0
    |
    6
    |
    0
    <HTML>
    <L-PDF> <Meta-XML>
    Updated:2024-02-27
  • Research on Mechanism of Expansion of Concrete Expanding Admixture MEA

    Issue 2, (1999)
    Abstract:The cause of volume change and the effects on the strength of portland cement ofMEA are analyzed. Through the X-ray analysis, the exparding of MEA is accompanied withthe increasing of the strength of portland cement harmoniously- The experiment resultsshow that CaSO4 in MEA is ranged from 30% to 50% while C3S(45%- 55%) and C3A(6 %-10% ) in portland cements are available.  
    Keywords:concrete,expanding admixture,ettringite,expanding mechanism  
    0
    |
    6
    |
    0
    <HTML>
    <L-PDF> <Meta-XML>
    Updated:2024-02-27