List of IssuesDocument Types

Volume,Issue6,1998
Issue Cover
  • Methods of Building up Automobile Constructive Modeling With AME of AutoCAD

    Issue 6, (1998)
    Abstract:The methods of building up automobile constructive modeling with the AME of AutoCAD, the functions and usages of the AME are described. The advantages of this method are that the automobile constructive models can be built simply and quickly. In addition, the models can be transformed to other drawing formats for other uses.  
    Keywords:AutoCAD,AME,automobile construction,  
    3
    |
    6
    |
    0
    <HTML>
    <L-PDF> <Meta-XML>
    Updated:2024-02-27
  • on-national Standard Micromotor Integrated Test Table System

    Issue 6, (1998)
    Abstract:A new type of non-national standard micromoter integrated test table system is designed with the application software of Visual Basic 4. 0 for WINDOWS3. 2 as well as the new techniques of DLL(dynamic link library) and DDE(dynamic data exchange),so that the parameters, current voltage, torque and speed etc. can be detected for the calculation of the output power and efficiency to qualify the motor. The field test result of the direct current micromotor is good.  
    Keywords:micromotor integrated test table system,non-nationa,standard,DDE,DLL,  
    1
    |
    6
    |
    0
    <HTML>
    <L-PDF> <Meta-XML>
    Updated:2024-02-27
  • Some Relations in Business Strategic Management

    Issue 6, (1998)
    Abstract:The relations of planning-practice and learning, top-down and bottom-up, decision-making by experiences and revolutionary ideas, as well as, operational effectiveness and positioning in business strategic management are analyzed to bring about the proper understanding to the strategic management.  
    Keywords:business,strategy,strategic management  
    1
    |
    6
    |
    0
    <HTML>
    <L-PDF> <Meta-XML>
    Updated:2024-02-27
  • Factor Analysis of Risk Management

    Issue 6, (1998)
    Abstract:Based on the analysis of many documents, in view of the request of promoting risk management in our present economy management, the concept, properties, characters, effects and types of risk are systematically analyzed. With the study on the subject, object, target, principle, program and countermeasures of risk management, the basic theory of general risk management is probed. The research provides useful methods for practices in the specific risk management.  
    Keywords:risk,risk management,factor analysis,system analysis  
    0
    |
    6
    |
    0
    <HTML>
    <L-PDF> <Meta-XML>
    Updated:2024-02-27
  • Application of Separate Ratio Estimator to Appraisal of Machinery and Equipment

    Issue 6, (1998)
    Abstract:According to the characteristic of equipment and stratified sampling theory,the separate ratio estimator is applied to the appraisal of machinery and equipment. By means of coarsely stratifying, reasonable sampling,precisely appraising the sample value,computing, ad justifying and applying the result to the population,the value of equipment and machinery is presented,as well as the scope of the value of the asset appraised. The sampling error of the method is verified by real example.  
    Keywords:asset appraisal,stratified sampling,machinery and equipment,separate ratio estimator  
    0
    |
    6
    |
    0
    <HTML>
    <L-PDF> <Meta-XML>
    Updated:2024-02-27
  • A Hybrid Algorithm With Q-2 Order Convergence Rate for One Dimension Optimization Problems

    Issue 6, (1998)
    Abstract:A hybrid algorithm exploiting Newton method and inexact Newton method for one dimension optimization problems is presented. The second derivative value is computed one time in two successive iterations. The Q-2 order convergence is proved under a reasonable assumption.  
    Keywords:1-dimension optimization,inexact Newton method,Q-2 order convergence  
    1
    |
    6
    |
    0
    <HTML>
    <L-PDF> <Meta-XML>
    Updated:2024-02-27
  • Convergent Properties of a New Quasi-Newton Method

    Issue 6, (1998)
    Abstract:As an improvement of the traditional method for solving quasi-Newton equation,a new method was proposed. And its global and local superlinear convergences are proved.  
    Keywords:quasi-Newton method,new quasi-Newton equation,global convergence,superlinear convergence,  
    1
    |
    6
    |
    0
    <HTML>
    <L-PDF> <Meta-XML>
    Updated:2024-02-27
  • A Note on Termination of Broyden Method for Linear System of Equations

    Issue 6, (1998)
    Abstract:D. P. O'Leary has proved that Broyden method must terminate in at most 2n steps on linear system of equations with n variables under certain conditions. He said that the termination would actually occur earlier when the conditions do not hold. It is proved that the Broyden method can be terminated earlier and/or terminated in 2n steps exactly when the conditions do not hold.  
    Keywords:linear equations,Broyden's method,termination,  
    0
    |
    7
    |
    0
    <HTML>
    <L-PDF> <Meta-XML>
    Updated:2024-02-27
  • Improving Separating Ability of Indented Cylinder Separator by Using Distributor

    Issue 6, (1998)
    Abstract:A systematic study on the working principles of an indented cylinder separator is conducted. Based on the analysis of the motion behavior of materials in the separator, a distributor was used in the experiment and the imitated seeds are used as the working materials. Two tests have been carried out to find the optimum parameters and working conditions of the equipment. The results have shown that the separating ability of the indented cylinder separator can be improved by adding the distributor.  
    Keywords:seed cleaning,indented cylinder separator,distributor,fullness of separating  
    0
    |
    6
    |
    0
    <HTML>
    <L-PDF> <Meta-XML>
    Updated:2024-02-27
  • Breakage Susceptibility of Shelled Corn Dried in Heated Air

    Issue 6, (1998)
    Abstract:The drying experiments of corn in three types of dryer were carried out, breakage susceptibility of corn was measured. The results show that it is related to temperature and velocity of air, initial moisture content of corn, as well as the cooling methods. The temperature was the most remarkable effect factor on breakage susceptibility. Among three types of dryer, the concurrent flow dryer with counter flow cooling has the least effect on breakage resistance, the breakage susceptibility of corn after drying was the smallest.  
    Keywords:dryer,corn,breakage susceptibility,  
    0
    |
    6
    |
    0
    <HTML>
    <L-PDF> <Meta-XML>
    Updated:2024-02-27
  • Issue 6, (1998)
    Abstract:The development of agricultural mechanization is affected mainly by sown area per labor, income per capita and yield per hectare. These key factors and their influences on the agricultural mechanization were discussed. The agricultural machinery gross power analysis model used in the development of agricultural mechanization is set up to show the relationship between the agricultural machinery gross power and those key factors.  
    Keywords:agricultural mechanization,agricultural machinery gross power,analysis,  
    0
    |
    6
    |
    0
    <HTML>
    <L-PDF> <Meta-XML>
    Updated:2024-02-27
  • Optimal Allocation of Water Amount of Yellow River in Inner Mongolia in 2000

    Issue 6, (1998)
    Abstract:The situation of water use of Yellow River in industry, agriculture and others in Inner Mongolia was analyzed and the optimal allocation of water use of Yellow River for agriculture in 2000 was calculated specially. The allocated scheme of water use of Yellow River for various departments of national economy was proposed. The problems for water use between up and down stream can be solved and the higher efficiency of water use can be obtained.  
    Keywords:water use of Yellow River,optimal allocation,Inner Mongolia,  
    0
    |
    6
    |
    0
    <HTML>
    <L-PDF> <Meta-XML>
    Updated:2024-02-27
  • Effects of Water-fertilizer Coupling on Cotton Yield Under Drip Irrigation

    Issue 6, (1998)
    Abstract:To identify the relations between the water-fertilizer coupling and the cotton yield, the field tests are conducted. The results show that there are 23. 3% to 28.7% of water can be saved by using border and drip irrigation compared with the simple border irrigation. The cotton yield per hectare will be increased quickly when the quantity of N-fertilizer is in the range of 150 kg .hm-2 to 225 kg.hm-2.  
    Keywords:cotton,drip irrigation,fertigation  
    2
    |
    7
    |
    0
    <HTML>
    <L-PDF> <Meta-XML>
    Updated:2024-02-27
  • Experimental Investigation on Root System Distribution of Apple Tree

    Issue 6, (1998)
    Keywords:apple tree,root system,water uptake,root weight density,root length density  
    0
    |
    6
    |
    0
    <HTML>
    <L-PDF> <Meta-XML>
    Updated:2024-02-27
  • Feasibility Study on Denatured Laminaria japonic Powder Used for Mulch Film

    Issue 6, (1998)
    Abstract:The production technique of Laminaria japonic powder denatured chemically is proposed. The powder mulch film can be used to replace alginate. One-share Laminaria jaPonic powder as a substitute of four-share alginate, can meet the requiremensts of the qualified film. The material cost can be reduced by 40%. The influences of denatured Laminaria jaPonic powder on property of film are investigated. All is similar to using alginate except transmisslvity.  
    Keywords:mulch film,material,Laminaria japonic,feasibility  
    0
    |
    6
    |
    0
    <HTML>
    <L-PDF> <Meta-XML>
    Updated:2024-02-27
  • Application of Hydraulic Press in Upsetting-extrusion-rotary Forging Compound Process

    Issue 6, (1998)
    Abstract:A rotary forging component as an accessory of hydraulic press is developed to extend the function and efficiency of the press. The laboratory experiments of this new component are carried out. The results show that the plate shaped elements with shaft or hub can be made by this new technology.  
    Keywords:hydraulic press,accessory,rotary forging equipment,upsetting-extrusion-rotary forging compound process  
    0
    |
    7
    |
    0
    <HTML>
    <L-PDF> <Meta-XML>
    Updated:2024-02-27
  • Optimum Design on Geometrics Parameters of Impeller Stage

    Issue 6, (1998)
    Abstract:On the basis of conditional extreme value of non-linear mathematical programming,the optimum design method was applied in the design on geometric parameters and one-dimension pneumatic thermodynamics of axial or radial turbine and compressor. The complete physical model and mathematical expressions were developed for axial or radial turbine optimum design. By using the SUMT method, the extreme value problem with inequality constraint conditions was turned into optimum design problem without constraints, and was calculated by DFP conjugate direction method. An example was provided to one-dimension optimum design of axial or radial turbine.  
    Keywords:impeller machine,stage,optimum design  
    0
    |
    6
    |
    0
    <HTML>
    <L-PDF> <Meta-XML>
    Updated:2024-02-27
  • A New Sensor Used in Soil Water Content Measurement

    Issue 6, (1998)
    Abstract:According to the principles of time domain reflecto-metry, a new kind of sensor of soil water content measurement is explored. Test results show that the measurement accuracy of the sensor can fit the requirments.  
    Keywords:soil water content,determination,time domain reflectometry,sensor  
    1
    |
    6
    |
    0
    <HTML>
    <L-PDF> <Meta-XML>
    Updated:2024-02-27
  • Study on Power-driven Operating Control System of 3-Coordinate Measuring Machine

    Issue 6, (1998)
    Keywords:3-coordinate measuring machine,stepping motor,power-driven operating-control system,  
    0
    |
    6
    |
    0
    <HTML>
    <L-PDF> <Meta-XML>
    Updated:2024-02-27
  • Preview Trajectory Curvature Method for Driver/Vehicle Directional Control Systems

    Issue 6, (1998)
    Abstract:A new preview strategy assumption, the preview trajectory, was proposed and a 5th order polynomial of the preview trajectory was derived. The handling model of the preview trajectory curvature for the driver/vehicle direction control systems was set up based on the trajectory equation. Simulation results show that the proposed driver model rendered very high tracking accuracy and robustness.  
    Keywords:man-vehicle system,handling,preview,  
    2
    |
    6
    |
    0
    <HTML>
    <L-PDF> <Meta-XML>
    Updated:2024-02-27
  • Monte Carlo Simulation for Data Process Mehtod of Vehicle Failures

    Issue 6, (1998)
    Abstract:An estimation formula of parameters of Weibull Distribution in reliability analysis is presented and tested by the Monte Carlo method. The Monte Carlo simulation test results show that this parameter estimation formula is correct.  
    Keywords:vehicle,failure analysis,data process,Monte Carlo simulation,  
    0
    |
    5
    |
    0
    <HTML>
    <L-PDF> <Meta-XML>
    Updated:2024-02-27
  • Study on Collection of Used Plastic Film in Fields

    Issue 6, (1998)
    Abstract:Plastic film laying on crop is widely used in China, but most of the used films are left inthe fields after harvesting, and pollution is made both to the soil and environment. The reasons that the used films can't be collected in time are analyzed. Countering the local conditions of different area, the different types of collectors are described. Measurements and suggestions are given to solve the problem.  
    Keywords:plastic film layingl used film,collection  
    7
    |
    7
    |
    0
    <HTML>
    <L-PDF> <Meta-XML>
    Updated:2024-02-27