Issue Ebookcover storyIssue Cover
List of IssuesDocument Types
- Abstract:The relationships between generalized reactive power and waveforms of voltage andcurrent are analyzed by using the correlation techniques. The concepts of similarity and completesimilarity of voltage and current waveforms are proposed. With these concepts it is derived andproved that the generalized power factor is essentially a measure of the difference between voltageand current waveforms, while the reactive power is just the result of this difference. Two characteristic parameters, similarity coefficient and complete similarity coefficient of voltage and currentwaveforms, are given to evaluate the quality of electric energy. The similarity coefficient characterizes the degree of being distortionless and the symmetry of load current related to voltagesource. The complete similarity coefficient is equivalent to the generalized power factor and characterizes the efficiency of power delivery of power systems.Keywords:correlation analysis generalized reactive power generalized power factor0|7|0<HTML><L-PDF> <Meta-XML>Updated:2024-02-27
- Abstract:By means of the orthogonal test method and the variance analysis , systematic researchon the influence of wet blasting technologic parameters to roughening result is conducted. It hasbeen shown that the parts' surface roughness obtained by optimized wet blasting technology hasbeen approached to the standard of American National Association of Corrosion Engineers No. 1and can meet the need of thermal spraying.Keywords:wet blasting thermal spraying bond strength technologic parameter,0|6|0<HTML><L-PDF> <Meta-XML>Updated:2024-02-27
- Abstract:Based on the establishment of Chinese food supply fluctuation magnifying and conducting figure, the external causes for the food supply fluctuation magnifying and conducting system are distinguished from internal causes. Different functions caused by different causes are ana-lyzed. The analyses are focused on the magnifying and conducting process of market fluctuationwhich include the analyses of the basic reasons for the magnification of farmer market supply foodfluctuation, Chinese food supply and demand model under the condition of complete free competition and the function of the government actions. The fluctuation of comparative benefit of foodproduction is the deep reason causing Chinese food supply fluctuation, lying the contradiction be-tween the small scale of production and the big market. Food supply fluctuation can be stabilizedby macroeconomic regulations, but effective macroeconomics regulation must be based on themarket distribution of food resources and the development of multiple food market principalparts.Keywords:food supply fluctuation,cause,China,systems analysis,macroeconomics regulation0|7|0<HTML><L-PDF> <Meta-XML>Updated:2024-02-27
- Abstract:Based on the comparative study on the agricultural protection policies in the developedcountries or organizations of Japan, U. S. A. and E. E. C. and the analysis of the present situation of agricultural protection in China and combined with the requirements of agricultural agreement of Uruguay Round Multilateral Trade Negotiations as well as the special situation of China,three selective principles of China's agricultural protection policies are proposed. The frame of theselective agricultural protection policies in China is designed and two difficult points of the imple-mentation of China's agricultural protection policies which are 'Slogan Agriculture' and a thorough reform of state food branches are analysed.Keywords:Comparative study,agricultural protection policies,selective principles,policy design,analysis of difficult points1|7|0<HTML><L-PDF> <Meta-XML>Updated:2024-02-27
- Abstract:Based on the systematical analysis of the main factors which affects grain supply anddemand in our country, and by using the scenario analysis method, grain supply trend in the future is analyzed. The extent of various factors which will affect the grain effective supply underdifferent conditions is studied. Results show that the research, application and extension of agri-cultural technology are the key for solving grain problems in the future.Keywords:grain,effective supply,restrained factors,scenario analysis0|7|0<HTML><L-PDF> <Meta-XML>Updated:2024-02-27
- Abstract:Based on the analysis of many documents, and in view of the shortcoming in researchmethod that had been studied on regulating and controlling inter-regional grain trade, the management thought, control theory and self-organization theory are combined with many soft science methods. A new system analsysis method is presented, it mainly includes the choices ofkind variables and relationship analysis, establishment and coupling of feedback effect return circuit, evolution and control of the system.Keywords:inter-regional grain trade,system analysis,return circuit coupling,effect mechanism,1|7|0<HTML><L-PDF> <Meta-XML>Updated:2024-02-27
- Abstract:The algorithms exploiting alternatively Newton iteration and inexact Newton iterationto solve the unconstrained optimization problems are considered. Their convergence characteristicis studied. The sufficient and necessary conditions for convergence with super-two order and 2(1+p) (oKeywords:Newton iteration,inexact Newton iteration,convergence rate,unary function3|6|0<HTML><L-PDF> <Meta-XML>Updated:2024-02-27
- Abstract:Lin Zhenghua presented an algorithm-mixed Newton and second-order quasi-Newtonmethod for solving the system of nonlinear equations. That algorithm is efficient, but there aresome drawbacks. An improved algorithm is developed which requires an approximate solution tothe system of linear equations at each iteration. Based on the rational assumption for the residuals, it is shown that all such methods share the same convergence properties as Lin's algorithm.Keywords:nonlinear equations,inexact Newton method,second-order quasi-Newton method,hybrid iterative method0|5|0<HTML><L-PDF> <Meta-XML>Updated:2024-02-27
- Abstract:The fast convolution is used to approximate random response, three schemes involvingrectangular, trapezium and Simpson' rule are proposed. The calculation times are compared between direct method and fast method, and the result shows that the computing speed of the newalgorithms may be faster 10 times than that of the old one.Keywords:structure dynamics,fast convolution,numerical integration2|6|0<HTML><L-PDF> <Meta-XML>Updated:2024-02-27
- Abstract:The elastic and plastic limit loads of circular silos are studied. The pressures and frictional forces on the wall of the silos are calculated according to Janssen formula. The limit loadsare calculated under a larger range of structure parameter. The condition of complete solution ischecked.Keywords:silo,Janssen formula,elastic and plastic limit loads,complete solution0|6|0<HTML><L-PDF> <Meta-XML>Updated:2024-02-27
- Abstract:The model of the rain-runoff on slope land is developed and the solution is obtained byusing the method of characteristics line. The simulation program of the model was compiled, anda real rain process for the runoff was simulated by this program. Results were compared with theones obtained by another mathematic model, and they are closely similar.Keywords:rain event,slope land runoff,method of characteristics line,computer simulation1|7|0<HTML><L-PDF> <Meta-XML>Updated:2024-02-27
- Abstract:To study transient performance of a wheel type tractor in the respect of slip controlsystem, a tractor resistance simulator is developed which is composed of a magnetic powder brakeused for exerting force on the model tractor. The simulator which replaces the plough and electro-hydraulic servo subsystem can be used for simulating the transient tractor-combination resistace which consists of static tractor-combination resistance, disturbing resistance and the changing resistance which will occur during plowing. Based on the simplified mathematical model ofelectro-hydraulic subsystem of a tractor-combination system, the changing resistance appearingin tillage operation is simulated. The simulator is suitable for different types of tractor throughchanging the controlling software and hardware. It provides a facility for easily finding out an optimum control algorithm of the slip control system.Keywords:tractor,slip,resistance simulator,magnetic powder brake,0|6|0<HTML><L-PDF> <Meta-XML>Updated:2024-02-27
- Abstract:In accordance with the present problems of apricot core crushing machine, experimental researches on grading and crushing device are carried out respectively based on the physicalproperties of apricot core. A small new machine is developed, and the grading and crushing oper-ations can be conducted at the same time. Experiments show that this machine works very well,the percentages of uncrushed apricot core and crushed almond are very low.Keywords:apricot-core crushing machine,grading,2|6|0<HTML><L-PDF> <Meta-XML>Updated:2024-02-27
- Abstract:The thin layer drying experiments of soybean were cqrried out, breakage susceptibilityof soybean after drying was measured. The main type of breakage of soybean after impacting iscotyledon scattering, the ratio of breakage cotyledon account for 30% of total breakage. Thevariance analysis shows that breakage susceptibility is related to air temperature, air velocity, initial moisture content and variety of soybean. The effects of air temperature on breakage susceptibility is more remarkable than other parameters. The higher the air temperature and velocity,the higher the breakage susceptibility. Further research is needed to find the relationship amongthe initial moisture content, variety of soybean and the breakage susceptibility.Keywords:drying soybean breakage susceptibility0|6|0<HTML><L-PDF> <Meta-XML>Updated:2024-02-27
- Abstract:In terms of pleurotus ostreatus' characteristic of secreting extracellar enzymes duringgrowing to degrade and digest lignin and cellulose, a new idea of using P. Ostreatus to degradeand convert crop wastes to feed was advanced. The component contents of cottonseed husk substrate at different growing stages throughout cultivating period were tested, and the feed valuesof substrates at various growing stages were evaluated, it's found that the feed value of substratewas better when sprouts just emerged from substrate surface, at this time, the coarse proteincontent of substrate was raised by 110%, but the coarse cellulose content degraded by 30. 8% ,and the lost weight not over 15%. The extrabody dry matter digestion rate trial on beef cattlewith corn stalk substrate harvested when sprouts just emerge was conducted, and a satisfying result was achieved.Keywords:crop wastes,pleurotus ostreatus,degradation,feed0|8|0<HTML><L-PDF> <Meta-XML>Updated:2024-02-27
- Abstract:In terms of A. Bisporus' characteristic of degrading and digesting manures and cropstalks, a unique idea of using A. Bisporus to convert animal manures and crop stalks to feed wasadvanced. The component contents of "chicken manure-wheat stalk" substrate at different grow-ing stages throughout cultivation period were tested, and the feed values of substrates at variousgrowing stages were evaluated, it can be seen that the feed value of substrate was better whensprouts just emerge from substrate surface, at this time, the coarse protein content of substratewas increased slightly but the coarse cellulose content decreased greatly, the feed va1ue of manureand straw, therefore, was improved.Keywords:manure and straw,A. Bisporus,degradation,feed0|7|0<HTML><L-PDF> <Meta-XML>Updated:2024-02-27
- Keywords:stepped quenching,Austenite-Bainite ductile iron,microscopic structure wear resistance0|7|0<HTML><L-PDF> <Meta-XML>Updated:2024-02-27
- Abstract:Using one-side drilling modular machine tool as an object of study,the method of CADon overall design of modular machine tool has been studied. On the basis of Hanized Auto-CAD,using the programming Language Turbo C2.0, the sub-modules for selecting current parts andgraphics are developed. According to the principles of parametric design method, a graphic program library for current parts has been built up by using the mode of parametric program. All ofthe current parts will be trans formed into SCR files by using this graphic program. Workingschematic drawings and connected dimension drawings are generated automatically and autodimension is available.Keywords:CAD/CAM,modular machine tool,overall design0|6|0<HTML><L-PDF> <Meta-XML>Updated:2024-02-27
- Abstract:The 3D surface can be defined directly by the boundary curve of the patch surface.The surface will be C1 continuous if the boundary curves connecting each two patches are C1 continuous. The complex calculation needed to control the parameters of surface can be avoided byusing the models presented in this paper. This new method is not dependent on any of surfacemodelling mechanism in CAD support software. Application examples are given and it has beenshown that this method has a very good universality.Keywords:machine free-curved surface,modeling CAD4|7|0<HTML><L-PDF> <Meta-XML>Updated:2024-02-27
- Abstract:A simulative test rig for energy-saving control in hydraulic transmitting power machine was developed after analyses of energy-saving theory and performance design. This test equipment is highly representative. A diesel engine is used as its motive power. The hydraulic system includes a volume control pump-volume steady motor system. The working conditions caneasily be re-realized by this equipment, so that this rig can be used in the development of hy-draulic-transmitting control system of machines such as automobiles, and it can be used forstudying control theory also. Many tests at work site and some experiments could be replaced bythe use of this rig. Therefore, the manpower and material resources will be saved and the developing speed of the control system will be incresased.Keywords:hydraulic transmission,energy-saving research,micro-computer control,simulative test rig,0|6|0<HTML><L-PDF> <Meta-XML>Updated:2024-02-27
- Abstract:By using a new array capacitance sensor, a measusing circuit and a complex circuit,the rate of flow and average velocity of the mass flowing in two phase flow can be measured di-rectly. A theoretical model is developed. The results obtained from the test have been shown thatthere is a good agreement between the theory and practice.Keywords:correlation gradient method,gas-solid two phase flow,mass flow,measurement,0|6|0<HTML><L-PDF> <Meta-XML>Updated:2024-02-27
- Abstract:Based on distilled water and NaCl electrolyte of low concentration, the strongly oxidized water is produced by altering the kinds of diaphragm, the distance of electrode pairs, theconcentration of electrolytic solution, voltage and the other factors. Further studies were madeon the sterilizing efficiency of strongly oxidized water. Results indicated that it was practicable toprepare strongly oxidized water by electrolysis; strongly oxidized water had a high sterilizing ef-fectiveness.Keywords:electrolysis,strongly oxidized water,sterilization1|6|0<HTML><L-PDF> <Meta-XML>Updated:2024-02-27
Effect of Motor Vehicle Driver''''s Field Dependence and Speed Anticiption Ability on Traffic Safety
Abstract:The differences in the field dependence and the speed anticipation ability between accident and non-accident motor vehicle drivers are analyzed. The results show that accident drivershave greater degree of field dependence than the pon-accident drivers. In addition, the speed anticipation errors for accident drivers are greater than those of non-accident drivers, and the accident drivers have the tendency to make reaction too early in contrast with non-accident drivers.Therefore, the field dependence and the speed anticipation ability can be used as the key psychological test items of driving suitability check.Keywords:motor vehicle driver,speed anticipation ability,field dependence,traffic safety1|6|0<HTML><L-PDF> <Meta-XML>Updated:2024-02-27









