List of IssuesDocument Types

Volume,Issue6,1996
Issue Cover
  • Infrared Remote Control LED Display Unit

    Issue 6, (1996)
    Abstract:Various display effects can be brought out by the 8031 single chip microcom-puter based control system by adopting CRT dispay technique and infrared remote con-trol operation. It is provided with word memory and clock circuit. The system has an excellent performance on its function and reliability.  
    Keywords:LED display unit,infrared remote control,display buffer,word memory,  
    1
    |
    6
    |
    0
    <HTML>
    <L-PDF> <Meta-XML>
    Updated:2024-02-27
  • Risk Treatment in Quality Supervise Inspection of Agricultural Seed

    Issue 6, (1996)
    Abstract:General principles and statistical methods are discussed for treating producer's risk and user's risk in the quality supervise inspection of angicultural seed.The limit quality level is calculated with special acceptance probability of 10%.  
    Keywords:market supervise,sampling inspection,acceptance quality level,producer's risk,limit quality level,user's risk,  
    0
    |
    6
    |
    0
    <HTML>
    <L-PDF> <Meta-XML>
    Updated:2024-02-27
  • Study on Effect of Adsorbing Ammonium Ion by Sandy Loam Soil

    Issue 6, (1996)
    Keywords:ammonium ion,adsorption,saturated soils,  
    0
    |
    6
    |
    0
    <HTML>
    <L-PDF> <Meta-XML>
    Updated:2024-02-27
  • Compression of Agricultural Fibrous Materials

    Issue 6, (1996)
    Abstract:The state-of-the-arts on compression of agricultural flbrous materials at home and abroad is reviewed. Some problems are pointed out, those are: 1) ln most of the studies,compression of agricultural fibrous materials were made only in closed-end dies; 2)Theoretical study is separated from the practice; 3)Some factors affecting com-pression are not considered overally; 4)Only simple rheologic characteristics of agricul-tural fibrous materials during being compressed is studied. Some study directions to be taken in the future are pointed out: 1)Creep and relaxation of agricultural fibrous tnate-rials should be studied during compressing in different charge amount and different compressing frequency; 2)The creep and relaxation of straw pieces and bales at differ-ent position in the chamber should be studied; 3) The expansion and tensile stress of a bale should be studied when it is released from chamber; 4) The factors,include press-ing force, compressing frequency, charge arnount,chamber length,bale length, humidi-ty and power comsumption,should be considered synthetically.  
    Keywords:agricultural fibrous materials,compression,rheologic characteristics  
    4
    |
    6
    |
    0
    <HTML>
    <L-PDF> <Meta-XML>
    Updated:2024-02-27
  • Analysis of Characteristics of Hose Type Wheel-Driven Automatic Sprinkler

    Issue 6, (1996)
    Abstract:The development of hose type wheel-driven automatic sprinkler,its operati-ing principles and characteristics are described. It is found that the sprinkling uniformi-ty and efficiency for this type of machine can meet the practical requirements. It is also found that the cost and operation requirements for the machine are suitable for the nat-ural and present economic conditions of China. The working performance, moving speed adjustment and energy consumption are analyzed so that this type of machine can be extended in China as soon as possible.  
    Keywords:hose wheel-driven type automatic sprinkler,energy consumption,sprinkler irrigation uniformity,performance,  
    0
    |
    6
    |
    0
    <HTML>
    <L-PDF> <Meta-XML>
    Updated:2024-02-27
  • A Study on Combined Technology for Producing Biogas and Ammoniated Forage by Straw

    Issue 6, (1996)
    Abstract:Producing biogas and ammoniated forage are two methods to improve the u-tilization of straw. The combined technology of producing biogas and ammoniated for-age by straw is studied. The results of experiments show that the process of solid bed acidification, two phase anuerobic digestion and ammoniation is feasible, which makes the separation of energy from matter of straw possible. A new process is proposed for combined treatment of straw and manure.  
    Keywords:fermentation,acidification,ammoniation,solid bed,  
    1
    |
    6
    |
    0
    <HTML>
    <L-PDF> <Meta-XML>
    Updated:2024-02-27
  • New Processing Technology on Keratinous Material

    Issue 6, (1996)
    Abstract:In view of the problems existing in keratin processing, a new technology is developed to produce compound extruding keratinous feed (CEKF), which including batching, processing and nutritions analysis. Feeding trials show that CEKF contains more than 70% of protein and amino acid are in balance. In addition, it has been shown that this new technology has better results than fish meal in both feed efficiency and nutritions aspects. Using it in compound feed instead of fish rneal, 10% of cost can be reduced and it has no environmental problems.  
    Keywords:compound extruding keratinous feed,formulae design,processing technology,feeding trial  
    0
    |
    7
    |
    0
    <HTML>
    <L-PDF> <Meta-XML>
    Updated:2024-02-27
  • Applications of Overhead Fans in Environment Control of Broiler Housing in Winter

    Issue 6, (1996)
    Keywords:broiler house,briquet stove heating,overhead fan,thermal environment,  
    2
    |
    8
    |
    0
    <HTML>
    <L-PDF> <Meta-XML>
    Updated:2024-02-27
  • Control System of Stacked-cage Layer House in Haikou

    Issue 6, (1996)
    Abstract:In order to adapt the modern animal husbandry scale and intensive develop-ment tendency,and counter the characteristics of high-density stacked-cage layer house in Haikou city, a control system is developed- It can be used to acquire data and control temperature, humidity,light intensity in confined poultry house. It can also be used to control the mechanical devices. In the meantime,the design methodology and some envi- ronment controling measures are described. The system has a good effect in produc-tion.  
    Keywords:layer house,data acquisition and control system,single-chip computer,ventilation system,  
    0
    |
    7
    |
    0
    <HTML>
    <L-PDF> <Meta-XML>
    Updated:2024-02-27
  • A Dynamic Change and Evaluation of Water Quality in Fishpond

    Issue 6, (1996)
    Abstract:Based on the practical aquaculture, the standard of evaluation is proposed firstly for classifying the water quality in fishpond. The comprehensive weight matrix of water quality assessment indices are also proposed based on fuzzy theory. The models are applied to assess and analyse the water quality, the experimental results are basically consistent with the practice.  
    Keywords:aquaculture,pond,water quality,classifying evaluation  
    0
    |
    6
    |
    0
    <HTML>
    <L-PDF> <Meta-XML>
    Updated:2024-02-27
  • Effects of Silicon in Stepped Quenching Bainite Ductile Iron

    Issue 6, (1996)
    Abstract:The effects of silicon on structures,mechanical properties and phase transi-tion dynamics of stepped quenching bainite ductile iron is studied. It is found that the transition in bainite ductile iron can be brought out by silicon, and thus the structure with good mechanical properties can be obtained. The theoretical analysis of this impor-tant effect is described.  
    Keywords:alloy silicon,stepped quenching,bainite ductile iron,bringing out transformation,  
    0
    |
    6
    |
    0
    <HTML>
    <L-PDF> <Meta-XML>
    Updated:2024-02-27
  • Microstructures and Properties of 65Mn Steel Under Laser Surface Treatment

    Issue 6, (1996)
    Abstract:The microstructure and micro-hardness of 65Mn steel under laser surface treatment,which can be used in agricultural machinery are analyzed. The results show that the microstructure consists of three parts:high hardness quench region from sam-ple surface with super fine martensite, hardness transition region with the mixture of martensite, troostite and pearlite, and low hardness base region with pearlite. Micro-hardness is up to HV900-1000 in high hardness quench region. Temper softening phenomena occur at the contact parts in condition of laser beam repeat scan.  
    Keywords:laser surface treatment,microstructure,micro-hardness,  
    1
    |
    6
    |
    0
    <HTML>
    <L-PDF> <Meta-XML>
    Updated:2024-02-27
  • Test of Wear Debris Analyser in Magnetic Separation

    Issue 6, (1996)
    Abstract:The performance and measuring effects of wear debris analyser are evaluated based on the principles of magnetic separation at laboratory. The test results show that wear debris analyser has stable characteristics and can fully meet the technique require-ments in mechanical fault diagnosis and magnetic separation technique is an effective method for mechanical fault diagnosis.  
    Keywords:magnetic separation,wear debris analyser,precision,reproducibility,repeatability  
    2
    |
    6
    |
    0
    <HTML>
    <L-PDF> <Meta-XML>
    Updated:2024-02-27
  • Analytical Expressions of Basic Force Characteristics of Bulb Hydraulic Turbines

    Issue 6, (1996)
    Abstract:According to the universal basic equation of hydraulic turbomachinery and the guide vane arrangement geometry of bulb turbine, a system of analytical expres-sions of basic force characteristics is developed. This system can be used for analyzing and calculating the steady working process and the transient conditions of bulb turbine installations. The application of this system for calculating the load rejection transients of bulb turbines has proved that those expressions are correct and suitable.  
    Keywords:bulb turbine,force characteristic,analysis  
    0
    |
    6
    |
    0
    <HTML>
    <L-PDF> <Meta-XML>
    Updated:2024-02-27
  • Comparison on 2 Algorithms for Improving FFT Precision

    Issue 6, (1996)
    Abstract:In order to improve the precision of FFT, the scheme of trapezoid and Simpson's rule are substituted for normal rectangular integration in FFT. The trunca-tion errors show that the Simpson's rule is far more precise than the other 2 methods.The truncated error of a single frequency signal for 3 methods are also derived.  
    Keywords:numerical integration,FFT,signal processing,  
    7
    |
    5
    |
    0
    <HTML>
    <L-PDF> <Meta-XML>
    Updated:2024-02-27
  • Development of a PC-based Data Acquisition and Analysis System for Engine Performance Test

    Issue 6, (1996)
    Abstract:After investigating various automated measurement techniques,domestic and abroad, a PC-based automated data acquisition and analysis system for engine test is developed, 9 parameters of the engine being tested can be measured by that system. As the application examples, the test results of the diesel engine load characteristics and control characteristics, which were obtained by using this system are given.  
    Keywords:engine,performance test,test data,microcomputer,data acquisition,data analysis,  
    0
    |
    6
    |
    0
    <HTML>
    <L-PDF> <Meta-XML>
    Updated:2024-02-27
  • Image Segmentation in Apple Automatic Grading

    Issue 6, (1996)
    Abstract:To speed up the image processing and raise its reliability,apple image seg- mentation in apple automatic grading is discussed. The way to quickly determine the processing window,the method of calculating threshold,and a comprehensive approach based on least square method and pixels zone to estimate and determine the searching direction are put forward. Test result shows that the metheds above are reliable,effec-tive and quick in image segmentation processing.  
    Keywords:image segmentation,apple grading,computer,  
    2
    |
    6
    |
    0
    <HTML>
    <L-PDF> <Meta-XML>
    Updated:2024-02-27
  • A Management Information System of Images and Text Database for Automobile

    Issue 6, (1996)
    Abstract:Based on a local area network(Novell) , a management information system of images and text for the automobile is developed with Foxpro for Windows. Also,some statistical analysis for analysing the structural parameters and the performance pa-rameters of the domestical autocars is carried out.  
    Keywords:automobile,database of images and text,performance of automobile,  
    0
    |
    6
    |
    0
    <HTML>
    <L-PDF> <Meta-XML>
    Updated:2024-02-27
  • Calibration of CCD Camera Used in Computer Vision Measurement

    Issue 6, (1996)
    Abstract:Based on the analysis of photogrammetric coordinate system and the princi-ples of coordinate transformation, the photogrammetric model of CCD camera used in the computer vision system is established. The method to determine the calibration co efficient and focus length is analysed theoretically. The calibration coefficient is mea-sured with high accuracy. The main parameters influencing the measurement of cali-bration coefficient is emphasized.  
    Keywords:computer vision,CCD camera,parameter,calibration  
    0
    |
    6
    |
    0
    <HTML>
    <L-PDF> <Meta-XML>
    Updated:2024-02-27