List of IssuesDocument Types

Volume,Issue4,1996
Issue Cover
  • Development and Proposal on Price Decision Making

    Issue 4, (1996)
    Abstract:The importance of the study on price decision making is discussed. The briefhistory of price theory is retrospected, the emphasis is put on the study fields and content of price decision and the current situation of price DSS. Some proposals on price decision making and price DSS are put forward.  
    Keywords:price theory,price decision making,price DSS  
    1
    |
    6
    |
    0
    <HTML>
    <L-PDF> <Meta-XML>
    Updated:2024-02-27
  • Issue 4, (1996)
    Abstract:The index system of comprehensive appraisement is developed based on thetheory of systems engineering. The weighted proportions of indexes are determined andthe mathematical model is constructured.  
    Keywords:scientific and technological demonstration area,index system,laminated analysis method,  
    0
    |
    7
    |
    0
    <HTML>
    <L-PDF> <Meta-XML>
    Updated:2024-02-27
  • Convergence Properties of Conjugate Gradient Methods With Goldstein Line Searches

    Issue 4, (1996)
    Abstract:Assuming that the objective function f(x) is bounded from below and istwice continuously differentiable on its level set, it is approved that the search directionsgenerated by the conjugate gradient with Goldstein line searches are descent, and. As a special case, the global convergence property of the Fletcher-Reeves method with Goldstein line searches is derived.  
    Keywords:conjugate gradient method,Fletcher-Reeves method,Goldstein line search,global convergence,  
    1
    |
    6
    |
    0
    <HTML>
    <L-PDF> <Meta-XML>
    Updated:2024-02-27
  • Nonmonotone Inexact Newton Methods With Global Convergence

    Issue 4, (1996)
    Keywords:nonlinear equations,ill-posed problems,nonmonotone,inexact Newton method,global convergence  
    0
    |
    6
    |
    0
    <HTML>
    <L-PDF> <Meta-XML>
    Updated:2024-02-27
  • Study on Groundwater Resources of Water-saving Demonstration Area in Beijing Xijiao Farm

    Issue 4, (1996)
    Abstract:By regulating caculation for groundwater resources of the water-savingdemonstration area in Beijing Xijiao farm,a dynamic prediction model on groundwater isdeveloped and the capacity of groundwater, allowed to be exploited in different yearsare obtained. Using this model groundwater dynamic in 2010 is forecast. The resultsshow that groundwater resources is being seriously over-exploited, hidden-depth ofgroundwater level will drop to 54. 2m at 2010,and the descending of the groundwaterlevel can clearly be retarded by the economy-water irrigation.  
    Keywords:groundwater resources,groundwater dynamic,allowable capacity of exploitation,economy-water irrigation  
    0
    |
    6
    |
    0
    <HTML>
    <L-PDF> <Meta-XML>
    Updated:2024-02-27
  • Design and Calculation of Several Structural Parameters of No-tillage Wheat Drill

    Issue 4, (1996)
    Abstract:A vertically mounted fork-type opener unit,characterized by easy adjustingand stronger cushioning effect,for no-tillage wheat drill with disc openers is suggestedafter calculating and analyzing its spacial motion. The interference problems, which willprobably occur when the position parameters of the hitch points and the opener mounting points are irrationally selected,are analyzed. Formulas to calculate the space of twolower hitch points are developed. The feasibility of the design and the accuracy of theformulas are proven through calculations and field tests.  
    Keywords:no-tillage drill,disc opener,oscillation angle of spring fork,hitch point spacing,  
    0
    |
    7
    |
    0
    <HTML>
    <L-PDF> <Meta-XML>
    Updated:2024-02-27
  • Development of Superheated Steam Drying Equipment

    Issue 4, (1996)
    Abstract:A new drying technology using direct contact of superheated steam wifh thewet material was developed in recent years. Many typical superheated steam dryingtechnologies such as: fluidized bed, tube-type, self-seal, direct-indirect heating andpneumatic conveying drying system were reviewed. The characteristics of these dryingsystems were analyzed. The reuse of exhaust steam, pre-heating and anti-airinfiltrationshould be included in the system. In some cases,boiler is not necessary. The further development of superheated steam drying will be the reuse of exhaust steam,using of vacuum and combined heating system.  
    Keywords:material drying,drying system,superheated steam  
    0
    |
    6
    |
    0
    <HTML>
    <L-PDF> <Meta-XML>
    Updated:2024-02-27
  • Spray Drying Technology in Large-scale Production of Spirulina Platensis SCS Powder

    Issue 4, (1996)
    Abstract:Spray drying technology in large-scale production of spirulina platensis SCSpowder is elucidated and the effects of operational parameters on qualities of algal powder are analysed. The possible technology problems which will probably occur in thespray drying process and the ways to solve these problems are presented and discussed.  
    Keywords:spirulina platensis SCS,spray drying,quality of algal powder,  
    0
    |
    6
    |
    0
    <HTML>
    <L-PDF> <Meta-XML>
    Updated:2024-02-27
  • A Computer System for Analysis and Management of Grain Dryers

    Issue 4, (1996)
    Abstract:A computer system for the analysis and management of grain dryers is developed on the basis of simulation,database, artificial intelligence and graphics technology. The system is composed of three parts (sub-system): grain drying simulation,grain drying information management and expert advices in grain drying. Internal interface and user interface are designed.  
    Keywords:grain drying,mathematical simulation,database,computer system,expert system  
    1
    |
    6
    |
    0
    <HTML>
    <L-PDF> <Meta-XML>
    Updated:2024-02-27
  • Microscopic Structural Analysis of Corn Dried in Natural Air

    Issue 4, (1996)
    Keywords:corn,microscopic structure,stress cracks,  
    1
    |
    7
    |
    0
    <HTML>
    <L-PDF> <Meta-XML>
    Updated:2024-02-27
  • Practical Technology for Preservation and Storage of Hawthorn in Natural Environment

    Issue 4, (1996)
    Abstract:According to the environmental and economic condition in the hawthorngrowing area,several most important factors are fixed and several test levels of thesefactors are established. The orthogonal test is carried out. After studying the experimental data, the important characteristics of these factors affecting preservation andstorage of hawthorn are ascertained. Finally,a suitable method of preservation and storage of hawthorn is obtained.  
    Keywords:hawthorn,preservation and storage,orthogonal test,  
    3
    |
    6
    |
    0
    <HTML>
    <L-PDF> <Meta-XML>
    Updated:2024-02-27
  • Heating Extraction of Leaf Protein Concentrated in False Indigo

    Issue 4, (1996)
    Keywords:leaf protein,false indigo,heating extraction,  
    0
    |
    6
    |
    0
    <HTML>
    <L-PDF> <Meta-XML>
    Updated:2024-02-27
  • Continuous Cooling of Bainite Ductile Iron

    Issue 4, (1996)
    Keywords:continuous cooling,Bainite ductile iron,heat treatment,  
    0
    |
    6
    |
    0
    <HTML>
    <L-PDF> <Meta-XML>
    Updated:2024-02-27
  • Transformation of Chromium-plating''s Structure and Properties After Irradiation by Laser Beam

    Issue 4, (1996)
    Keywords:chromiun-plating,laser radiation,surface treating,  
    2
    |
    6
    |
    0
    <HTML>
    <L-PDF> <Meta-XML>
    Updated:2024-02-27
  • Definition of Generalized Reactive Power and Characteristic Parameters in Nonsinusoidal Circuits

    Issue 4, (1996)
    Abstract:Multiphase voltage and current functions are defined to be two vectors inHilbert inner product space and orthogonal resolution of current vector is taken by usingthe projection theorem. The expressions of the definitions of universally adapted generalised powers and characteristic parameters are given and their properties are discussed.  
    Keywords:nonsinusoidal circuit,generalized power,Hilbert inner product space,  
    0
    |
    6
    |
    0
    <HTML>
    <L-PDF> <Meta-XML>
    Updated:2024-02-27
  • Design of Fraction Horsepower Three-winding Single Phase Capacity Induction Motor

    Issue 4, (1996)
    Abstract:It is pointed out that three-winding type of induction motor has more advantages than two-winding type. A new multi-winding design calculation program is developed by means of so-called compound current analysing method. A Y-connectionthree-winding single phase capacity induction motor is analysed. Through a large number of calculations and analysis,the design principle is put out,the best ranges of the parameters of each windings are determined. This design program is proved by tests intwo- and three-winding induction motors. The conclusion shows that three-windingtype of single phase induction motor has higher power output than that of two-windingmotor. Some running indexes even reach to those of three phase induction motors, sothe new type of induction motor has a pretty good prospect in manufacture and application;  
    Keywords:fraction horsepower,three-winding,induction motor,Y-connection,magnetic force,positive phase sequence,negative phase sequence,harmonics,  
    0
    |
    6
    |
    0
    <HTML>
    <L-PDF> <Meta-XML>
    Updated:2024-02-27
  • Control System of Programmable Controller Used in Automatic Car Washers

    Issue 4, (1996)
    Abstract:According to the technological process and control requirements of the automatic car washer, a C-60P programmable controller is applied in the control system ofthat washer. The condition coding control program,time control program,latching control program and exporting control program are developed using ladder diagrams. Thehardware of this system includes some electric equipment such as limit switches,electromagnetic switc hes, alternating- current contact ors and motors. This control system hasbeen proved to be very popular due to its high reliability and good performances.  
    Keywords:ladder diagram,condition coding control,latching control program,time control program,interlocking,automatic car washer,  
    1
    |
    6
    |
    0
    <HTML>
    <L-PDF> <Meta-XML>
    Updated:2024-02-27
  • Linearized Appraisal of Dairy Cow''''s Conformation Using Image Measurement Technique

    Issue 4, (1996)
    Abstract:The purpose, importance and index of linearized appraisal of dairy cow'scon formation have been introduced. A hardware and an interactive image measurementsoftware system have been developed,which is realized in microcomputer. The experimental results show that this system has high speed and meet the need of precision. Itcan be used in practice instead of manual evaluation.  
    Keywords:image measurement,dairy cow's conformation,linearized appraisal,  
    1
    |
    6
    |
    0
    <HTML>
    <L-PDF> <Meta-XML>
    Updated:2024-02-27
  • Trends of Development of Beverage in China

    Issue 4, (1996)
    Abstract:The current situation of beverage in China is investigated, the developmentcondition of beverage abroad is also reviewed, and then the trends of development ofbeverage in China is predicted besed on the ninth five-year plan and a long-term plan ofbeverage industry by the year 2010. Carbonated beverage will take a dominant position, closely followed by tea,natural and functional beverages.  
    Keywords:soft beverage,development trend,forecasting,  
    1
    |
    6
    |
    0
    <HTML>
    <L-PDF> <Meta-XML>
    Updated:2024-02-27
  • Modified Janssen Formula for Flexible Circular Bins

    Issue 4, (1996)
    Keywords:modified Janssen formula,flexible bin,pressure on bin wall  
    0
    |
    6
    |
    0
    <HTML>
    <L-PDF> <Meta-XML>
    Updated:2024-02-27
  • Study on Modelling Related to Collision Between Vehicle and Barrier

    Issue 4, (1996)
    Abstract:The digital simulation with a personal computer-based software is applied forthe simulation and analysis of the impact procedure between a vehicle and a spring barrier. The Euler and Lagrangian principles are used to establish the mathematical modelof the vehicle with three-dimensional motion. The model of collision between vehicleand roadside spring barrier is developed. The logical judgment of impact procedure arediscussed. The algorithm for the contact area, impact force and impact torque, as wellas the applied point of the force on the vehicle is presented. Finally, the application examples are given.  
    Keywords:vehicle,barrier,collision-model,simulation  
    0
    |
    7
    |
    0
    <HTML>
    <L-PDF> <Meta-XML>
    Updated:2024-02-27